ONLINE SHOP
Start of Content
MEASURING GUIDE

MEASURING GUIDE

Firstly decide whether the blind(s) will be fitted inside the window recess or on the outside.

INSIDE RECESS

For inside recess fitting you will need to take the full recess measurement from wall to wall and order as 'RECESS SIZE'.

Using a metal tape measure take firstly the WIDTH and then the DROP measurements in 3 places (as shown). Order as the smallest measurement and we will make the necessary deductions for clearance.

OUTSIDE RECESS

OUTSIDE RECESS


For outside recess fitting you will need to measure the exact area you need the blind to cover. We recommend allowing at least 50mm coverage all around the window.

Measure the WIDTH then DROP required allowing for this overlap and order as BLIND SIZE.

ADDITIONAL INFORMATION WHEN MEASURING FOR ROLLER BLINDS
The fabric on Roller Blinds will be approx 35mm narrower than the overall blind width to allow for end controls and brackets.

FOR FURTHER ADVISE PLEASE CALL TYNE BLINDS ON 0191 447 9700


spacer
End of Content